Table of Contents
Advertisement
Cleaning the MICR Unit
Dirt on the MICR unit may cause frequent magnetic character reading
errors. Use a cleaning sheet to clean the MICR unit regularly, at least
every six months.
Use the following cleaning sheet, or an equivalent commercialy available
cleaning sheet.
PRESAT Brand (KIC) "CHECK READER CLEANING CARD"
Note:
Do not use sticky cleaning sheets. They may cause a paper jam or machine failure.
Be sure to dispose of used cleaning sheets.
Follow these steps to clean the MICR unit.
1.
Turn off the printer.
2.
Open the roll paper cover, and turn on the printer while pressing the
CLEANING button.
3.
Press the CLEANING button once, and close the roll paper cover.
4.
Insert a cleaning sheet. With the ASF model printers, insert a cleaning
sheet while pulling the lever on the back of the printer.
With the ASF model
Scanning ID Card Image Data
Notes on ID Card Reading
❏
Make sure that the ID card is flat and does not have excessive
bending, cracks, folds, or embossing.
❏
Do not touch the external terminal when using an IC card.
❏
Do not insert anything other than cards.
❏
Do not open any covers while an operation is in progress.
In the following situations, appropriate quality of the image data is not
guaranteed.
❏
When the image scanner section is exposed to sunlight, spotlights,
fluorescent lights, or other excessive lights.
❏
When the glass of the scanner is damaged by sand or other foreign
materials.
With the non-ASF model: Insert the check in
the same way as described in "Inserting
Checks" (on page 14).
English
TM-J9000/J9100 15
Advertisement
Table of Contents
