Table of Contents
Advertisement
5.
Take a new ink cartridge out of its packaging, and remove the yellow
tape.
CAUTION:
Do not remove any tape on which the EPSON logo is printed.
6.
Carefully insert a new ink cartridge from the top, and push it firmly
but gently until it clicks in place. See the picture below to make sure
the inserting direction is correct.
Color
7.
Close the ink cartridge cover firmly until it clicks in place. The INK
OUT LED will now go off.
When you first use the printer, installing an ink cartridge begins charging
the ink supply. This operation lasts approximately one minute. (The
POWER LED flashes during this operation.)
When you replace an ink cartridge after the first time you use the printer,
the POWER LED will flash for a short time before the printer is ready to
print.
Note:
Do not turn off the power or open any cover while the POWER LED is flashing.
This causes the printer to restart the ink charging, which wastes ink.
When the POWER LED stops flashing and stays on, the printer is ready
for printing.
Handling Used Ink Cartridges
Dispose of the used ink cartridges as industrial waste. Also, observe the
laws in your country and district for the disposal method.
English
Black
(TM-J9100)
TM-J9000/J9100 11
Advertisement
Table of Contents
