Battery - HP ML150 - ProLiant - G6 User Manual

Battery

If the server no longer automatically displays the correct date and time, you may need to replace the
battery that provides power to the real-time clock. Under normal use, battery life is 5 to 10 years.
WARNING:
pentoxide, or an alkaline battery pack. A risk of fire and burns exists if the battery pack is not
properly handled. To reduce the risk of personal injury:
Do not attempt to recharge the battery.
•
Do not expose the battery to temperatures higher than 60°C (140°F).
•
Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
•
• Replace only with the spare designated for this product.
To remove the component:
Power down the server (on page 7).
1.
For ML110 G6 servers, extend the server from the rack.
2.
For ML150 G6 servers, do one of the following:
3.
Unlock and remove the bezel
o
Extend the server from the rack.
o
Remove the access panel (on page 7).
4.
CAUTION:
and remove all AC power cords before removing or installing the expansion boards.
Remove the battery.
5.
IMPORTANT:
configuration. After replacing the battery, reconfigure the system through BIOS Setup Utility.
The computer contains an internal lithium manganese dioxide, a vanadium
("Remove the tower bezel (ML150 G6
To prevent damage to the server or expansion boards, power down the server
Replacing the system board battery resets the system ROM to its default
servers)" on page 8).
Battery 89