HP ML150 - ProLiant - G6 User Manual page 58

NOTE: For the location of server LEDs and information on their statuses, refer to the server
documentation.
Possible causes:
•
Improperly seated or faulty power supply
•
Loose or faulty power cord
•
Power source problem
•
Power on circuit problem
•
Improperly seated component or interlock problem
•
Faulty internal component
Item See
1 Server maintenance and service guide, located on the Easy Set-up CD
or the HP website (http://www.hp.com/products/servers/platforms)
2 "General diagnosis flowchart (on page 55)"
3 "Loose connections (on page 52)"
4 "Power source problems (on page 65)"
5 •
"Power supply problems (on page 65)"
•
Server maintenance and service guide, located on the Easy Set-up
CD or the HP website
(http://www.hp.com/products/servers/platforms)
6 "System open circuits and short circuits (on page 75)"
Troubleshooting 58