Single- And Dual-Rank Dimms (Ml110 G6 Servers); Dimm Identification (Ml110 G6 Servers) - HP ML150 - ProLiant - G6 User Manual

Channel
1
2
This multi-channel architecture provides enhanced performance in Advanced ECC mode. This architecture
also enables the Mirrored Memory and Lockstep memory modes. This server supports Unbuffered DIMMs
(UDIMMs).
DIMM slots in this server are identified by number and by letter. Letters identify the slots to populate for
specific AMP modes. Slot numbers are reported by ROM messages during boot and for error reporting.

Single- and dual-rank DIMMs (ML110 G6 servers)

To understand and configure memory protection modes properly, an understanding of single-, dual-, and
quad-rank DIMMs is helpful. Some DIMM configuration requirements are based on these classifications.
A single-rank DIMM has one set of memory chips that is accessed while writing to or reading from the
memory. A dual-rank DIMM is similar to having two single-rank DIMMs on the same module, with only
one rank accessible at a time. A quad-rank DIMM is, effectively, two dual-rank DIMMs on the same
module. Only one rank is accessible at a time. The server memory control subsystem selects the proper
rank within the DIMM when writing to or reading from the DIMM.
Dual-rank DIMMs provide the greatest capacity with the existing memory technology. For example, if
current DRAM technology supports 2-GB single-rank DIMMs, a dual-rank DIMM would be 4-GB.

DIMM identification (ML110 G6 servers)

IMPORTANT:
these two types causes the server to halt during BIOS initialization.
Slot
C
A
D
B
This server does not support mixing RDIMMs and UDIMMs. Attempting to mix
Slot number
1
2
3
4
Hardware options installation 22