Snmp Manager Configuration - D-Link DFE-2624 - Hub - Stackable User Manual

Dual-Speed Stackable Hub Web-based Management User's Guide
Boot Server Address
configuration file is located.
Boot Protocol
Software Update Control is enabled.
Get IP From Bootp Server
BOOTP server.

SNMP Manager Configuration

The SNMP Manager Configuration screen allows you to define community strings and
access privileges.
The information is described as follows:
Community String A user-defined SNMP community name.
Access Right The permitted access using the SNMP community name.
Delete Click this to delete the community name.
6
The IP address of the TFTP server where the
bootp-tftp
Set to either
If enabled, the address will be obtained from the
tftp only
or . Applies only if the