Remote Mode; Function Button; Audio Setting; Default - Panasonic PT-DW530E Operating Instructions Manual

REMOTE MODE

You can customize the [REMOTE IN] terminal
function.
1 ) Press ▲▼ to select [REMOTE MODE].
2 ) Press ◄► to switch [REMOTE MODE].
The setting will change as follows each time
z
◄► is pressed.

DEFAULT

USER
The pin assignment of the [REMOTE
DEFAULT
IN] terminal is used as the projector
default setting. (
This is used for changing the settings
for the REMOTE terminal.
USER Any settings you make for pins 2
to 8 become valid once you press
<ENTER> button.
Use the setting for F Series-compatible
F SERIES
REMOTE terminal.

FUNCTION BUTTON

Three function buttons (<FUNCTION1 to 3>) on the
remote control and the <FUNCTION1> button on the
projector can be assigned to any frequent operations.
They can be used as a useful shortcut button.
1 ) Press any of the <FUNCTION1 to 3>
buttons on the remote control or the
<FUNCTION1> button on the projector.
2 ) Press <MENU> button on the remote
control or the projector to select a
menu option (Main Menu, Submenu or
Advanced Menu).
For the on-screen menu selection, see
z
screen menu". ( Æ page 40)
3 ) Hold down any of the <FUNCTION1
to 3> buttons on the remote control
or the <FUNCTION1> button on the
projector more than 3 seconds.
Note
For details, see "FUNCTION BUTTON" section of
z
"PROJECTOR SETUP". (
F SERIES
Æ
page 86)
buttons
"On-
Æ page 67)
PROJECTOR SETUP menu

AUDIO SETTING

VOLUME
J
You can adjust the volume of the VARIABLE AUDIO
OUT terminal.
◄ Decrease
z
► Increase
z
BALANCE
J
You can adjust to hear the sound played equally
through both right and left from VARIABLE AUDIO
OUT, or shift the balance so more sound plays
through the left or right side.
◄ More sound plays through the left side
z
► More sound plays through the right side
z
IN STANDBY MODE
J
You can switch on/off the sound output in standby
mode.
OFF No sound in standby mode.
z
ON Output audio in standby mode.
z
AUDIO IN SELECT
J
A sound input terminal of [AUDIO IN 1], [AUDIO IN
2], [AUDIO IN 3], [HDMI AUDIO IN] and [NETWORK
AUDIO IN] can be selected.
1 ) Press ▲▼ to select a [AUDIO IN
SELECT] terminal.
2 ) Press ◄► to switch [AUDIO IN
SELECT].
The setting will change as follows each time the
z
button is pressed.
AUDIO IN 1 AUDIO IN 2
NETWORK
AUDIO IN
*2
*1 : An input terminal having the HDMI port only
*2 : An input terminal having the network port only
Sound is output from AUDIO IN 1
AUDIO IN 1 terminal when video of preset input
terminal is projected.
Sound is output from AUDIO IN 2
AUDIO IN 2 terminal when video of preset input
terminal is projected.
Sound is output from AUDIO IN 3
AUDIO IN 3 terminal when video of preset input
terminal is projected.
Sound is output from HDMI terminal
HDMI
when video of preset input terminal is
AUDIO IN
projected.
Sound is output from NETWORK
NETWORK
terminal when video of preset input
AUDIO IN
terminal is projected.
AUDIO IN 3
HDMI AUDIO
IN
*1
67
ENGLISH -