Cautions On Wireless Lan Module Installation; Procedure - Panasonic PT-DW530E Operating Instructions Manual

Cautions on Wireless LAN Module Installation

Cautions on Wireless LAN Module Installation
The optional Wireless LAN Module (part number ET-WM200E) is required to use
wireless LAN functions.
During installation, remove the cap from the Wireless LAN Module and mount the
module in the projector.

Procedure

1 ) Remove the setscrew of the Wireless
LAN Module cover, and remove this
cover from the projector.
2 ) Face the LED lamp of the Wireless LAN
Module upward, and insert the module
into the slot.
3 ) Close the Wireless LAN Module cover,
and secure it by tightening the Wireless
LAN Module cover fixing screw.
Note
Keep the small parts out of the reach of small children.
z
Tighten screws using a torque screwdriver or others. Do not use an electric screwdriver or an impact
z
screwdriver.
The serial number of accessories and optional parts is subject to change without notice.
z
94
- ENGLISH
Wireless LAN Module cover
Wireless LAN Module cover
fixing screw
LED lamp