Display Setting; Text Change; Menu Lock; Menu Lock Password - Panasonic PT-DW530E Operating Instructions Manual

SECURITY menu

DISPLAY SETTING

You can set your original text, such as company
name or URL information, to display regularly on the
projected image while projecting.
1 ) Press ▲▼ to select [DISPLAY
SETTING].
2 ) Press ◄► to switch [DISPLAY
SETTING].
The setting will change as follows each time
z
◄► is pressed.

OFF

OFF The text display is disabled.
TEXT The text display is enabled.
The picture registered by the user
LOGO1
will be projected.
Note
Separate software [Logo Transfer Software] is required in
z
order to create the pictures to use for [LOGO1]. Consult
your dealer.

TEXT CHANGE

You can enter your original text to be displayed when
[DISPLAY SETTING] is turned [TEXT].
1 ) Press ▲▼ to select [TEXT CHANGE].
2 ) Press <ENTER> button.
The [TEXT CHANGE] screen will be displayed.
z
3 ) Press ▲▼◄► to select characters
and press <ENTER> button to input
them.
4 ) Press ▲▼◄► to select [OK], and
press <ENTER> button.
The text is now changed.
z
74
- ENGLISH
TEXT LOGO1

MENU LOCK

You can lock <MENU> button function and the
password will be asked to display the menu every
time.
1 ) Press ▲▼ to select [MENU LOCK].
2 ) Press ◄► to switch [MENU LOCK].
The setting will change as follows each time
z
◄► is pressed.
OFF
Deactivate the [MENU LOCK]
OFF
system.
ON Activate the [MENU LOCK] system.
Note
Once [MENU LOCK] is set to [ON], you cannot use
z
<MENU> button unless you input the correct password.
The [MENU LOCK] is set to [OFF] by default and when
z
initialized.
The unlock state is maintained until the projector is set to
z
the standby mode.

MENU LOCK PASSWORD

You can change the password for [MENU LOCK]
system to your original.
1 ) Press ▲▼ to select [MENU LOCK
PASSWORD].
2 ) Press <ENTER> button.
The [MENU LOCK PASSWORD] screen will be
z
displayed.
3 ) Press ▲▼◄► to select characters
and press <ENTER> button to input
them.
4 ) Press ▲▼◄► to select [OK], and
press <ENTER> button.
To stop, select [CANCEL].
z
Attention
The factory default password is "AAAA".
z
When the projector is initialized, the password will be
z
changed to the factory default setting, "AAAA".
Change the MENU LOCK PASSWORD regularly and
z
make it uneasy to guess.
ON