Connecting To Devices On The Network (Connecting In Access Point Mode); Connecting This Unit To An Access Point (Such As A Wireless Lan Router) - Panasonic HX-A100D Owner's Manual

Connecting to devices on the network
(Connecting in Access Point mode)
The following connections are for controlling this unit from a smartphone via an access point
(wireless router, etc.) or for playing back motion pictures in this unit on a DLNA-compatible TV. (The
connections of both 1 and 2 are required)
≥ Check if the wireless access point is compatible with IEEE802.11b, IEEE802.11g, or
IEEE802.11n.
≥ Recording, playback and uploading using Image App, etc. are also available for the
connection via an access point.
1 Connecting this unit to an access point (such as a
wireless LAN router)
Connecting to a WPS-compatible access point
Please read the manual of your access point and check if the access point is compatible with WPS.
≥ If your access point is not compatible with WPS, connect this unit with an access point according
to "Entering SSID to connect to an access point".
1
Press the Wi-Fi/WPS button continuously to
change the Wi-Fi mode lamp to [
≥ The Wi-Fi mode lamp [
2
Press and hold the Wi-Fi/WPS button for
3 seconds or more.
≥ The Wi-Fi mode lamp [
3
Press the WPS button of your access point within 3 minutes. (Set to
the WPS standby state.)
≥ Wi-Fi mode lamp [
] flashes.
] flashes faster.
] will turn on when the connection is completed.
DLNA-compatible devices
(l 42)
].
- 41 -
Image App
XXXXX
XXXXX XXXXX