Troubleshooting - Panasonic HX-A100D Owner's Manual

Wearable camera
Hide thumbs Also See for HX-A100D:
Table of Contents

Advertisement

Troubleshooting

Problem
The lens fogs up.
This unit cannot be turned
on.
This unit does not stay on
long enough.
Battery runs down quickly.
If the microSD card is
inserted in this unit, it is
not recognized.
The power lamp flashes for
5 seconds and the power
turns OFF.
The access lamp flashes
for 5 seconds and the
power turns off (a warning
sounds).
This unit arbitrarily stops
recording.
Pictures cannot be taken.
Color balance of images is
strange when recording in
a place such as a
gymnasium.
Recorded motion pictures
flicker.
Horizontal lines appear in
recorded movies.
≥ This is due to condensation. It is not a malfunction. Please refer
to page 4.
≥ Charge the battery again to ensure it is sufficiently charged.
(l
11)
≥ In cold places, the battery using time becomes shorter.
≥ If the operating time is very short even after the battery has
been recharged sufficiently, the battery has worn out. Consult
with your dealer.
≥ If the microSD card is formatted on a PC, it may not be
recognized by this unit. Use this unit to format microSD cards.
(l
21)
≥ The temperature has become high. Please wait until the
temperature of this unit decreases.
≥ A card which is not guaranteed to work may have been inserted,
or the number of folders or files on the inserted card may
exceed the limit.
Check the error details on the Image App screen.
≥ Use a microSD card that can be used for motion picture
recording.
(l
13)
≥ The recordable time may have shortened due to the
deterioration of the data writing speed or repeated recording
and deletion. Using this unit, format the microSD card.
≥ Using a microSD card with a speed class of 4 or less in [Slow
motion mode]
(l
24) may cause to stop recording suddenly.
(l
13)
≥ Pictures cannot be taken while recording motion pictures.
≥ Pictures cannot be taken in [Interval rec mode].
≥ Pictures cannot be taken during live broadcasting.
≥ In a place with multiple light sources, such as a gymnasium or a
hall, set the White Balance setting to [Indoor 2]. If you cannot
record clearly with the [Indoor 2], set it with [Custom].
≥ If motion pictures are recorded in [Slow motion mode]
with the [1280k720/120fps]/[640k360/240fps] setting, flickering
or horizontal lines may appear when recorded under a
fluorescent light.
- 54 -
Check points
(l
21)
(l
26)
(l
24)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hx-a100Hx-a100k

Table of Contents