Initializing This Unit; Initializing The Network Settings - Panasonic HX-A100D Owner's Manual

Others

Initializing this unit

Initializing the network settings

This returns the following network-related settings to the default states.
≥ An SSID/password for this unit set after the purchase
([Camera Wi-Fi settings] # [Camera SSID settings] in the Image App)
≥ An SSID/password for the access point you use in Live broadcast mode
([Camera Wi-Fi settings] # [Live mode settings] # [Set connect. dest.] in the Image App)
≥ An SSID/password for the access point you use in Access Point mode
([Camera Wi-Fi settings] # [AP mode setup] # [Set connect. dest.] in the Image App)
≥ A login ID and password for the "LUMIX CLUB"
([Playback settings] # [LUMIX CLUB settings] # [Manage login ID] in the Image App)
Turn on this unit while pressing and holding
the Wi-Fi/WPS button, and press and hold the
Wi-Fi/WPS button A and the power button B
for approximately 5 seconds
≥ When the Wi-Fi mode lamps [ ] [
approximately 1 second and turn off, the initialization of
the network settings is complete.
≥ When the operation buttons are locked
≥ Initializing a login ID and password for the "LUMIX CLUB" will only delete them from this unit, and
will not cancel the membership. The site remains available.
.
] [ ] light up for
(l 8), the network settings cannot be initialized.
- 53 -
B
A