Setting The Connection Destination For Live Broadcasting (Connecting In Live Broadcast Mode); Connecting This Unit With An Access Point (Such As A Wireless Router) - Panasonic HX-A100D Owner's Manual

Advanced
Setting the connection destination for
Live broadcasting
(Connecting in Live broadcast mode)
This is the connection method for Live broadcasting using the "LUMIX CLUB" and "USTREAM"
services.
≥ Check if the wireless access point is compatible with IEEE802.11b, IEEE802.11g, or
IEEE802.11n.
≥ Access point settings are required specially for Live broadcasting.
* Only the smartphone compatible with tethering is available.
Connecting this unit with an access point (such as a
wireless router)
Connecting to a WPS-compatible access point
Please read the manual of your access point and check if the access point is compatible with WPS.
≥ If your access point is not compatible with WPS, connect this unit with an access point according
to "Entering SSID to connect to an access point".
1
Press the Wi-Fi/WPS button continuously to
change the Wi-Fi mode lamp to [
≥ The Wi-Fi mode lamp [
2
Press and hold the Wi-Fi/WPS button for
3 seconds or more.
≥ The Wi-Fi mode lamp [
3
Press the WPS button of your access point within 3 minutes. (Set to
the WPS standby state.)
≥ When "2 Beeps" sound 8 times, the connection is completed.
*
] flashes. ("1 Beep" sounds 8 times.)
] flashes faster.
- 35 -
LUMIX CLUB
(l 36)
].
USTREAM