Panasonic HX-A100D Owner's Manual page 55

Problem
Mosaic-like noise
appears and movement
is jagged when viewing
the live view screen.
A motion picture file is
created that is longer
than the recording time.
This unit does not
change to playback
mode.
Files cannot be played
back.
Power of this unit does
not turn OFF, even after
closing Image App.
The Image App screen
suddenly changes to
recording mode.
When the USB cable is
disconnected, an error
message will appear on
the PC.
When connected by the
USB cable, this unit is
not detected by the PC.
Cannot see the PDF
operating instructions
for HD Writer WE 1.0.
It cannot connect to the
access point or
smartphone.
Radio waves get
disconnected.
≥ If the Recording Mode is set to [1920k1080/60p], mosaic-like
noise may appear on the screen, and movement may not seem
smooth.
≥ Recording in [Slow motion mode]
file that is longer than the recording time. For example, the playback
time of a motion picture recorded in [640k360/240fps] (1/8 slow-
motion) will be 8-times longer than the actual recording time.
≥ When this unit is recording a movie, Image App cannot change to
playback mode.
≥ If a high-quality motion picture is copied to a smartphone, it may
not be able to be played back on the smartphone.
≥ The power of this unit can be turned OFF by tapping
[Camera function] # [Camera power off] from the Image App
screen.
≥ Image App changes to changes to recording mode if pressing the
recording start/stop button or photoshot button on this unit while
Image App is in playback mode.
≥ To disconnect the USB cable safely, double-click the
task tray and follow the instructions on the screen. (Windows)
≥ If the power of this unit is OFF, this unit starts charging when it is
connected to a PC.
≥ After re-inserting the microSD card into this unit, reconnect the
supplied USB cable.
≥ Select another USB terminal on the PC.
≥ Check the operating environment.
≥ Connect the supplied USB cable again after restarting the PC and
turning on this unit again.
≥ You will need Adobe Acrobat Reader 5.0 or later or Adobe
Reader 7.0 or later to read the PDF operating instructions for
HD Writer WE 1.0.
≥ Check how to connect to the access point and how to set the
security settings.
≥ If it takes time to complete the connection, the Wi-Fi connection will
be aborted. Reset the connection settings.
≥ Make sure the SSID and password have been correctly input.
(l 44)
≥ When the radio waves are interrupted, the condition may improve
by moving the location or changing the angle of the access point.
≥ Is any device, such as microwave oven, cordless phone, etc., that
uses 2.4 GHz frequency operated nearby? Radio waves may get
interrupted when used simultaneously. Use them sufficiently away
from the device.
- 55 -
Check points
(l 24) will create a motion picture
(l 45, 46, 50)
(l
(l 24)
#
icon in the
41)