Performing A Live Broadcast - Panasonic HX-A100D Owner's Manual

Performing a live broadcast

Press the Wi-Fi/WPS button continuously to change
the Wi-Fi mode lamp to [
≥ Wi-Fi mode lamp [
≥ A live broadcast starts.
≥ If [E-mail Setup] is enabled, a broadcast notification e-mail is sent to the
addresses that have been set.
∫ To stop a live broadcast
Press the Wi-Fi/WPS button, and turn off the Wi-Fi mode lamp.
≥ If recording is taking place on this unit during a live broadcast, the live broadcast cannot be
stopped. Stop the motion picture recording in advance.
∫ About live broadcast images
You can record live broadcast images by pressing the recording start/stop button.
≥ The Image App cannot be used connecting with this unit in Live broadcast mode. Access the URL
of the live broadcast to check the image.
∫ When the Wi-Fi mode lamp [
approximate interval of 0.5 second)
A live broadcast cannot be started.
≥ In the following cases, live broadcasting is not available.
j When the recording mode is set to [1920k1080/60p] or [1280k720/60p]
j When in [Slow motion mode]
j While recording a motion picture
j When in [Interval rec mode]
j When the date setting is out of sync by a day or more
j When two cameras simultaneously perform live broadcasts at the same account (The camera
that has started the broadcast first will be disconnected from the broadcast)
≥ When settings for live broadcasts are completed and [E-mail Setup
set, a live broadcast starts and a notification e-mail is sent to all registered e-mail
addresses each time the Wi-Fi mode lamp [
≥ When you cannot view and listen to a broadcast using the USTREAM application of a television
or a smartphone, the password of a distribution program is canceled. Please rebroadcast.
≥ If a live broadcast motion picture is saved on the "USTREAM" side, the file name will be the same
as the channel name.
≥ The live broadcast stops as the elapsed broadcast time exceeds 8 hours 30 minutes, and then it
starts again. (A separate file will be saved on the "USTREAM" side.)
].
] will turn on when the connection is completed.
] is flashing fast (flashing at an
] lights up. When not sending, set to
- 40 -
] in [
Live mode settings
] is
OFF.