Adobe 22011292 - Audition - PC Using Instruction page 136

USING ADOBE AUDITION
Video and surround sound
2 Map each 5.1 channel to a sound card output:
• L: Front left speaker.
• R: Front right speaker.
• C: Front center speaker.
• LFE: Subwoofer
• Ls: Left surround speaker.
• Rs: Right surround speaker.
For more information, see
Edit 5.1 surround files
In the Waveform Editor, you can edit 5.1 surround files with the same tools used for mono and stereo files. See
audio files" on page 35.
To restrict editing to a subset of 5.1 channels, see
Pan tracks in a 5.1 surround mix
Open or create a 5.1 multitrack session. (See
1
To open the Track Panner, do either of the following:
2
• Choose Window > Track Panner. Then select a mono or stereo track in the Editor panel.
• In the Editor or Mixer panel, double-click a surround plot for a mono or stereo track.
Note: You can pan only mono and stereo tracks, not 5.1 tracks. To adjust the relative volume of channels in a 5.1 file,
open it in the Waveform Editor.
Double-click a surround plot to open the Track Panner
3 In the Track Panner, do any of the following:
• To enable or disable channels, click the L, C, R, Ls, and Rs buttons. Or click LFE Only to send audio only to the
subwoofer.
• In the large surround plot, drag to change the position of the signal.
As you drag, white lines change in length from the speakers, reflecting the power of the signal in each. In the
background, green and purple areas reflect the placement of left and right stereo image; blue areas indicate
where the image overlaps.
• Below the surround plot, set the following options:
Shows where in the surround field the sound appears to originate from. For example, -90° is directly to
Angle
the left, while 90° is directly to the right.
"Configure audio inputs and
"Specify which channels you want to
"Create a new multitrack
Last updated 2/16/2012
outputs" on page 18.
edit" on page 41.
session" on page 21.)
132
"Editing