Display During Connect Copy; If Connect Copy Is Canceled - Ricoh Aficio MP 6000 Troubleshooting Manual

Troubleshooting When Using the Copy/Document Server Function

Display During Connect Copy

This section describes about the display during Connect Copy.
Problem
[Connect Copy] is not dis-
played.
2
[Connect Copy] is not dis-
played.
[Connect Copy] is not dis-
played.
[Connect Copy] is not dis-
played.
[Connect Copy] is not dis-
played.
[Connect Copy] is not dis-
played.
[Connect Copy] appears
faded.

If Connect Copy Is Canceled

This section describes about causes and remedies when Connect Copy is can-
celed.
Problem
The machine cancels
Connect Copy.
The machine cancels
Connect Copy.
The machine cancels
Connect Copy.
An error message indi-
cates the main machine
has broken down.
30
Cause
The sub-machine's main
power is off.
Functions that cannot be
used with Connect Copy
are selected on the main
machine (such as storing
or copying the first page
of a document in the Doc-
ument Server).
The main machine is in
Interrupt mode.
The [Connect Copy Key Dis-
play] setting is off.
The cable connecting the
two machines is damaged.
The L is lit.
Functions that cannot be
used with Connect Copy
have been set.
Cause
The main machine's main
power is off, or the operation
switch has been pressed.
The sub-machine's main
power is off.
The Weekly Timer setting
is coming into effect on
the main machine.
The L is lit.
Solution
Turn on the main machine's main power.
Cancel the functions selected on the
main machine.
Press the {Interrupt} key on the sub-ma-
chine to cancel Interrupt mode.
Select [Display] for the [Connect Copy Key
Display] setting.
Contact your service representative.
Follow the instructions displayed.
Press the {Clear Modes} key to clear the
settings.
Solution
Turn on the sub-machine's main power
or operation switch, and then press
[Connect Copy].
A message instructing you to check the
sub-machine appears on the display of
the main machine. Press [Cancel] to clear
Connect Copy. Turn on the sub-ma-
chine's main power, press [Connect Copy]
and then make your settings again.
Turn on the main machine's operation
switch , and then press [Connect Copy].
Copying is not possible. Follow the in-
structions displayed.