Troubleshooting When Using The Copy/Document Server Function; Messages Displayed When Using The Copy/Document Server Function - Ricoh Aficio MP 6000 Troubleshooting Manual

2. Troubleshooting When Using the
Copy/Document Server Function
This chapter describes likely causes of and possible solutions for copier/docu-
ment server function problems.
Messages Displayed When Using the
Copy/Document Server Function
This section describes the machine's main messages. If other messages appear,
follow the instructions they contain.
Important
❒ If you cannot make copies as you want because of the paper type, paper size
or paper capacity problems, use recommended paper. See "Copy Paper",
About This Machine.
❒ For messages that are not listed here, see p.9 "When You Have Problems Op-
erating the Machine".
Message
Cannot detect
original size.
Cannot detect
original size.
Cannot detect
original size.
Check original
orientation.
Check paper size.
Rotate Sort is
not available
with this paper
size.
Cause
Improper original is
placed.
Improper original is
placed.
Original is not placed.
Original is not placed in a
proper orientation.
Improper paper size is
set.
A size of paper for which
Rotate Sort is not availa-
ble is selected.
Solution
Select paper manually, not in Auto Pa-
per Select mode, and do not use Auto
Reduce / Enlarge function. See "Sizes
difficult to detect", Copy/Document
Server Reference.
Place the original on the exposure glass.
See "Placing Originals on the Exposure
Glass" and "Sizes difficult to detect",
Copy/Document Server Reference.
Place your originals.
Change the orientation of the original.
If you press the {Start} key, copy will
start onto the selected paper.
Select the proper paper size. See "Sort",
Copy/Document Server Reference.
17