Using The Erase Option - Xerox 2006NPC - DocuColor Color Laser Manual

22. Copy Features

Using the Erase option

Use the following procedure to make a copy using the Output option:
1. If the DocuColor 2006 is in printer mode, press the Copy button to enter
copy mode.
2. Press the Clear All button to restore default settings.
3. Position the original on the Document Glass or in the Document Feeder.
For more information on positioning originals on the Document Glass and
using the Document Feeder, go to the Basic Copying chapter.
4. Press the Advanced Features button. Advanced Features selection is
displayed on the Copier Screen.
5. Use the Arrow Buttons to highlight the Erase option.
6. Press the Select button. Erase selection is displayed on the Copier
screen.
7. Use the Arrow Buttons to highlight one of the following:
•
•
8. Press the Select button. One of the following happens:
•
•
If you enter an incorrect value, press the Clear (C) button to delete it.
22–22
On to turn the Erase feature on.
Off to turn the Erase feature off.
If you selected Off, Advanced Features selections will redisplay on
the Copier Screen. Skip to step 10.
If you selected On, Erase value selection is displayed on the Copier
Screen. Use the Arrow Buttons to highlight an erase dimension.
Use the Numeric Keypad to enter an erase value between 0 mm
and 50 mm.
Horizontal
Vertical
Center
Xerox DocuColor 2006