Paper Supply - Xerox 2006NPC - DocuColor Color Laser Manual

22. Copy Features

Paper Supply

The Paper Supply feature allows you to select the desired paper for your
copies.
The following Paper Supply options are available on the DocuColor 2006:
•
Auto – The copier/printer automatically determines original size and the
appropriate paper supply. The copier/printer then pulls the appropriate
copy stock from paper tray 1, 2, or 3.
•
Paper Trays 1, 2, and 3 – This Paper Supply option allows you to select
a paper tray loaded with the desired output size.
Selecting Paper Tray 1, 2, or 3 along with the Auto % reduce/enlarge option
prompts the DocuColor 2006 to fit the original image on the desired output
paper size. More information on using the Reduce/Enlarge feature is
provided at the beginning of this chapter.
•
Bypass Tray – This option allows you load your desired output paper
into the Bypass Tray. Use this method when copying original documents
onto transparencies, labels, envelopes, postcards and other
unconventional paper stocks.
More information on using the Bypass Tray is provided later in this chapter.
Using Paper Trays 1, 2, and 3
Use the following procedure to make a copy using the paper trays 1, 2, or 3:
For instructions on loading paper trays 1, 2, or 3, go to the "Setting Up the
DocuColor 2006" chapter.
1. If the DocuColor 2006 is in printer mode, press the Copy button to enter
copy mode.
2. Press the Clear All button to restore all default settings.
3. Position the original on the Document Glass or in the Document Feeder.
For more information on positioning original documents, go to the "Basic
Copying" chapter.
22–4
Xerox DocuColor 2006