Xerox 2006NPC - DocuColor Color Laser Manual page 8

22. Copy Features
Loading Transparencies into the Bypass Tray
Transparencies can be fed only from the Bypass Tray or optional
Transparency Tray that goes into Tray 1 position. Use only the transparencies
specified in the DocuColor 2006 Recommended Materials List.
Leaving transparencies in the Bypass Tray can cause static build up, which
can cause a jam. Be sure to remove the transparencies when the job is
complete.
Use the following procedure to load transparencies into the Bypass Tray:
1. Fan the transparency sheets a few at a time to separate them and
prevent static.
2. Insert transparencies into the Bypass Tray until they are touching the
feeding slot. Slide the right-hand paper guide against the transparency
stack.
22–8
0302514A- W O L
Xerox DocuColor 2006