Using The Lighten/Darken Feature - Xerox 2006NPC - DocuColor Color Laser Manual

Lighten/Darken
The Lighten/Darken feature enables you to adjust the overall density of the
copy output. This feature offers an Auto Contrast option as well as five
lighten/darken levels.
When the Auto option is selected, the copier/printer automatically determines
the density of the original. The copier/printer then adjusts the density levels of
the copy output to optimize image quality.

Using the Lighten/Darken feature

Follow these steps to make a copy using the Lighten/Darken feature:
1. If the DocuColor 2006 is in printer mode, press the Copy button to enter
copy mode.
2. Press the Clear All button to restore default settings.
3. Position the original on the Document Glass or in the Document
Feeder.
For more information on positioning originals on the Document Glass and on
the Document Feeder, go to the Basic Copying chapter.
4. Press the Lighten/Darken button. Copy Density selection is displayed
on the Copier Screen.
5. Perform one of the following actions:
•
•
•
6. Press the Select button. The Copier Screen returns to the main menu.
7. Enter your desired number of copies using the Numeric Keypad.
8. Press the Start button.
Xerox DocuColor 2006
Use the up arrow button to go from Auto mode to manual mode
density selection.
Use the right and left arrow buttons to select one of the fine copy
densities between Dark and Light in manual mode.
Use the down arrow button to return to Auto mode from manual
mode selection.
22. Copy Features
22–15