Oki CX4545 MFP Operator's Manual page 67

4.ADVANCED FUNCTIONS
4
Press [BOX NUMBER] to display the entry screen. Key in the box number(s) (a
maximum of 20 digits), and then press [OK].
 If you want to set a password (a maximum of 20 digits), key in the password in the same way as the box
number.
 If the box number or password is incorrect, an error message is displayed and you are unable to proceed.
5
Specify the recipient to be registered, and then press [OK].
 P.25 "Specifying the recipient"
Specify the recipient from the address book because this cannot be done with direct dialing.
6
The confirmation screen for sending a relay transmission report is displayed. If you
want to send the report, select [YES]. If not, select [NO].
By default, the relay transmission end terminal report is sent when a communication error occurs. On the
ADMIN menu, you can make setting so that the report can be sent automatically. For details of the operation,
refer to the MFP Management Guide.
4 ADVANCED FUNCTIONS
Mailbox Transmission 65