Oki CX4545 MFP Operator's Manual page 32

2 SENDING/RECEIVING A FAX
Selecting the LDAP server
To search for the recipient's fax number in the LDAP server, press the pull-down menu in the recipient search
menu. The list of the LDAP servers is displayed. Press the LDAP server name you want to search, and then press
[OK].
3
The search result is displayed. Press the desired FAX icon (
 Press
 Alternatively, you can select the recipient by pressing the address name box. In such case, if a fax number and
an E-mail address have been registered to the recipient's address, both of them are selected.
 To cancel the selected recipient, press it again.
 In the memory transmission mode, you can send the same document to multiple recipients (up to 400
recipients) at once. Repeat this selection until you select all the recipients. For the multi-address transmission,
you can also specify the recipients (up to a total of 400 recipients) by combining with other entry methods.
 To confirm all the selected recipients or delete unnecessary recipients, press [DESTINATION].
 P.31 "Confirming the recipients"
30 Sending a Fax
or to switch the pages.
), and then press [OK].