Off-Hook Transmission - Oki CX4545 MFP Operator's Manual

2.SENDING/RECEIVING A FAX
 Off-hook transmission
In this mode, you can pick up the handset of the external telephone to dial and perform direct fax transmission. Off-hook
Transmission is available when
1
Place the original(s).
 P.17 "Handling an original"
2
Press the [FAX] button on the control panel.
 P.14 "Basic procedures"
3
Press [OPTION] and set the transmission conditions.
 P.21 "Setting the transmission conditions"
4
Pick up the handset of the external telephone.
5
Use the external telephone to dial the fax number.
 P.25 "Specifying the recipient"
When you use the external telephone to dial, the machine dials each number you enter. If you make a mistake
when dialing the fax number, replace the handset to cut the line, and then pick up the handset again to redial.
6
When you hear the answer tone (short high-pitched tone) through the built-in speaker
indicating the connection has been made with the recipient's machine, press [SEND].
 P.14 "Basic procedures"
When you hear the other party's voice answering the call before pressing [SEND], ask him/her to perform
operation of the fax reception.
7
Replace the handset of the external telephone.
 Displaying the preview
Before sending a fax, you can check the image on the touch panel with this preview function.
1
Press [PREVIEW] on the fax menu.
 To use the preview function, specify the recipient and then press [PREVIEW].
on the upper right of the screen is OFF.
2 SENDING/RECEIVING A FAX
Sending a Fax 33