Oki CX4545 MFP Operator's Manual page 17

2.SENDING/RECEIVING A FAX
4
Specify the recipient.
To specify the recipient, dial the number using the digital keys on the control panel or use the address book.
 P.25 "Specifying the recipient"
5
To display the preview screen, press [PREVIEW].
 P.33 "Displaying the preview"
6
Press [SEND].
The fax is sent or reserved.
 Alternatively, you can press the [START] button on the control panel.
 In the memory transmission mode, the original is scanned into memory. Once a connection has been made,
this equipment automatically starts sending the scanned document. In the direct transmission mode, the fax
number is dialed immediately, and the scanned document will be sent. (Transmission conditions can be set
in the transmission condition setting screen.)
 If memory becomes full during scanning in the memory transmission mode, that original will not be stored in
memory. When that happens, reduce the number of originals you are sending, or try sending them in the
direct transmission mode.
 You can check the status of the current sending. You can also cancel the transmission (deletes the job).
 P.41 "CHECKING AND CANCELING THE COMMUNICATIONS"
2 SENDING/RECEIVING A FAX
Sending a Fax 15