Removing Jammed Staples; 1000-Sheet Finisher - Ricoh 3035 - Aficio B/W Laser General Settings Manual

Troubleshooting

Removing Jammed Staples

Note
❒ Curled paper may cause staples to jam. To avoid this, turn copy paper over
in the tray. If there is no improvement, change to stiffer copy paper.
❒ When the booklet finisher is installed, after removing jammed staples, staples
will not be ejected the first few times you try to use the stapler.
Reference
For types of finisher, see p.21 "External Options".

1000-Sheet Finisher

6
144
ZGJS801E
ZGJS802E
ZGJS813E
ZGJS814E
• 1: Open the front cover of the finisher, and
then pull out the staple unit.
• 2: Hold the green lever while gently pull-
ing out the cartridge .
• 3: Open the cartridge's face plate.
• 4: Remove any jammed staples.