Install Software; Wireless Connection - Epson WorkForce WF-M1560 Start Here

7

Install software

Note: If your computer does not have a CD/DVD drive, you can
download the software from the Epson website (see "Epson technical
support").
Caution: Be sure to close your other programs, including any screen
savers and virus protection software, before beginning this software
installation.
1
Make sure the printer is NOT CONNECTED to your
computer.
Windows : If you see a Found New Hardware screen, click Cancel
®
and disconnect the USB cable. You can't install your software that
way.
2
Insert the product CD.
3
Windows 8: Click the CD/DVD drive message that appears
on your computer screen. Then select Run Setup.exe. If you
don't see this option, navigate to your CD/DVD drive and
double-click Setup.
Windows (other versions): If you see the AutoPlay window,
click Run Setup.exe.
Mac OS X: Double-click the
4
Windows: If you see the User Account Control screen, click
Yes or Continue.
5
Click Install (Windows) or Continue (Mac OS X) and follow
the instructions on your computer screen.
6
When you see the screen below, check the "Connection
options" section on this sheet for more information.
Choose your connection. Then click Next (Windows) or
Continue (Mac OS X) and follow the instructions on your
computer screen.
EPSON icon.
Connection options

Wireless connection

You must install the software on every computer from which
you want to print. For the first installation, we recommend
using a USB cable (not included) to simplify wireless setup.
After the printer is connected to the network, you will be
prompted to remove the cable.
If you're using Mac OS X 10.6.x, 10.7.x, or 10.8.x, or you
don't have a USB cable, you will need to use the buttons on
the printer to select wireless settings. Follow the instructions
on your computer screen during software installation; they will
explain how to connect the printer wirelessly this way.
Make sure you know your network name (SSID) and network
password:
• Network name
• Network password
If you don't have this information, contact the person who set
up your network.
To view how-to-videos on setting up your printer's wireless
connection, go to epson.com/support (U.S.) or
epson.ca/support (Canada).
Direct USB connection
Make sure you have a USB cable (not included).
Wired network connection
Make sure you have an Ethernet
included). You must install the software on every computer
from which you want to print.
Any problems?
If you experience problems during setup, see below:
Network setup was unsuccessful.
• Make sure you select the right network name (SSID).
• If you see a firewall alert message, click Unblock or Allow
to let setup continue.
• If your network has security enabled, make sure you enter
your network password (WEP key or WPA passphrase)
correctly. If it has uppercase (ABC) or lowercase (abc)
letters, make sure you enter them correctly.
Repeatedly press the numeric keypad buttons as
necessary to select uppercase letters (ABC), lowercase
letters (abc), numbers, or symbols (*!#&).
Press to move to the next character.
Press to delete.
Press the OK button when you're finished entering your
password.
network cable (not
®