Table of Contents
Advertisement
28
What to do if...
Malfunction
The programme indicator for the
selected dishwashing cycle is
flashing,
the indicator for the end of the
dishwashing cycle is flashing in
rhythm 2 short light signals one
after another.
the indicator for the end of the
dishwashing cycle is flashing in
rhythm 3 short light signals one
after another.
The cycle is not starting.
Rust spots are visible in the dish
washing compartment.
A whistling noise can be heard
when washing dishes.
Possible cause
The sink outlet is blocked.
Water drain hose has not been
correctly positioned.
The anti flood system has been
triggered.
The mains plug is not
plugged in.
A fuse in the house's wiring sys
tem is defective.
For dishwasher models with a
delay start timer:
A start time has been selected.
The dishwashing compartment
is made from rust free stainless
steel. Rust spots in the dish
washing compartment are due
to rust particles from external
sources (rust particles from wa
ter pipes, pans, cutlery, etc.). Re
move such spots with a
commercially available stain
less steel cleaning product.
The whistling is not a cause for
concern.
Remedy
Clean out sink outlet.
Check hose installation.
Turn off the tap and con
tact the Customer Care de
partment.
Plug in mains plug.
Replace fuse.
If the dishes are to be
washed immediately, can
cel the delay start.
Only wash cutlery, dishes
and pans that are suitable
for dishwasher use.
Decalcify appliance with
commercially available
agents for cleaning dish
washers.
If the noises can still be
heard after decalcifying the
machine, use a different
brand of detergent for
washing cutlery and dishes.
Advertisement
Table of Contents
