Function buttons: In addition to the pre set dishwashing cycle, the following
functions can also be set using these buttons:
Function button 1
Function button 2
Function button 3
The rinse aid inflow is only affected, if the 3in1 function is selected.
The multi display can indicate:
– the start time that has been set.
– 3 horizontal bars: the setting mode has been activated with function buttons
– 1 horizontal bar: dishwashing cycle is running
– Multi display is off: dishwashing cycle is completed
The control indicators have the following meanings:
3 IN 1
1) These control indicators are never illuminated while a dishwashing cycle is running.
Sets the water softener
Activates/deactivates rinse aid inflow when 3in1 on
Activates/deactivates the 3in1 function
Refill with special salt
Refill with rinse aid
3 in 1 function activated