Installing The Software For Linux - Agilent Technologies Acqiris DC110 User Manual

Family of 8-bit digitizers for use with dp and dc series digitizers
Hide thumbs Also See for Acqiris DC110:
Table of Contents

Advertisement

2.3.

Installing the Software for Linux

The Acqiris Software is ready to install and run on Linux systems with any of the following:
RedHat Enterprise Linux Version 3 - Kernel Version 2.4.21-4.EL
RedHat Enterprise Linux Version 3 - Kernel Version 2.4.21-4.ELsmp,
Suse Linux 9.2 - Kernel version 2.6.8-24-smp,
Debian Sarge 3.1 2.6.8-3-686,
Debian 4.0 etch Kernel version 2.6.18-4-686,
Scientific Linux 4.4 Kernel version 2.6.9-11.EL)
The following tar files exist with the driver and library compiled with the GNU gcc version shown:
AcqirisLinux-3.1a-gcc-3.3.tar.gz - compiled under Suse 9.2 with GNU gcc 3.3.
AcqirisLinux-3.1a-gcc-3.4.tar.gz - compiled under SL 4.4 with GNU gcc 3.4.
AcqirisLinux-3.1a-gcc-4.1.tar.gz - compiled under Debian etch with GNU gcc 4.1.
The Kernel Driver source code is available for recompilation for users with other Linux systems.
The appropriate tar file should be copied to a local directory (e.g. your home directory) and then unpacked by using
the following command
tar xzf AcqirisLinux-3.1a-gcc-X.x.tar.gz
The resulting directory AcqirisLinux contains an install script drv-install and a graphical Demo program
demo/AcqirisDemo.
Before installing the driver you have to put the correct version of the Kernel mode driver into acqirisPCI.o. Type
cd AcqirisLinux/lib/modules
and either
cp acqrsPCI.o[.n] acqrsPCI.o
or
cp acqrsPCI.ko[.n] acqrsPCI.ko
where [.n] is the running version of the Linux kernel. This can be obtained by running the command
uname -r
The following versions exist:
User Manual: Family of 8-bit Digitizers
(Linux kernel 2.4)
(Linux kernel 2.6)
Page 21 of 66

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents