Cleaning; Disposal And Recycling - Agilent Technologies Acqiris DC110 User Manual

1.12. Cleaning

Cleaning procedures consist only of exterior cleaning.
Clean the exterior surfaces of the module with a dry lint-free cloth or a soft-bristle brush. If any dirt remains, wipe
with a cloth moistened in a mild soap solution. Remove any soap residue by wiping with a cloth moistened with clear
water. Do not use abrasive compounds on any parts.

1.13. Disposal and Recycling

Electronic equipment should be properly disposed of. Acqiris Digitizers and their accessories must not be thrown out
as normal waste. Separate collection is appropriate and may be required by law.
User Manual: Family of 8-bit Digitizers Page 9 of 66