Advertisement
HARDWARE INSTALLATION
If you are using the ISDN TA PC Card under Windows 95/98, Do NOT insert the PCMCIA card until
after the software installation is completed.
1.
Align the PC card with the arrow sign pointing toward the computer's
PCMCIA slot.
2.
Connect the 15-pin PC card connectors with the two exposed end of the
PC card. Precautions have been made so that you won't install your two
cables backwards, relying on unique groves at the connectors. These
'groves' will insure a cable will not be installed in the wrong place. The
modem cable is on the right, while the ISDN cable is on the left. Push
evenly and steadily until the units 'click'.
3.
Connect the ISDN line to the opposite end of the ISDN Network
Connection Cable. Note: If your NT1 box does not have 100 ohm resistor,
then the 100 Ω Ω Ω Ω terminator resistor (optional) is required and should be
used as a connector to connect the ISDN line with the ISDN Network
Connection Cable. Consult your dealer if the 100 Ω terminator resistor is
not included in the package.
Connect to ISDN TA 56K
FAX/MODEM PC Card
or
Connect to ISDN TA 56K
FAX/MODEM PC Card
Connect to ISDN Line
- 4 -
Terminal resistor
Connect to ISDN Line
Advertisement
