Advertisement
3.
Open the ISDN tab. Select appropriate ISDN voice encoding scheme for
your location. Generally, you should select "A-law" for European
countries, and "Mu-law" for N. America.
4.
Run "Config" in "Configuration Utility".
5.
Open "Switch type" tab. Choose appropriate "Voice Encoding" scheme.
Now you are ready to use the RVS-COM's Softmodem function. Refer to the
RVS-COM on-line documentation for application details.
Making Modem over PSTN Connections
The "Modem over PSTN" is also possible in CAPI through working together
with RVS-COM Lite software.
Note: The "Fax over PSTN" function does not work in this case.
1.
Run RVS-COM "CommCenter".
2.
Disable the "Use Softmodem" and "Use SoftwareFax to send/receive
fax" function (refer to "Softmodem" and "SoftwareFax" tab). Click
"Apply" and "OK".
3.
Connect the analog fax/modem DAA network connection cable and hook
up the analog telephone line.
4.
Run "Config" in "Configuration Utility".
5.
Open "General" tab.
6.
Click "Modem over Analog Telephone Line (PSTN)" in "Modem
Setting (for RVS-COM)".
- 26 -
Advertisement
