4.5 Lubrications
4.5.1 Areas Requiring Application of Grease
The machine has areas that require grease to permit smooth movement of parts or ensure good electrical conductivity.
If you have replaced a part in these areas or if you have removed the grease, be sure to apply grease.
[1]
[2]
[15]
[3]
[4]
[5]
[6]
F-4-2
[1] Delivery idler gear
[2] Fixing drive transmission gear
[3] Large gear bushing R
[4] Large gear
[5] Feed gear
[6] Internal gear
[7] Large gear deceleration gear/Plate R
[8] Main motor
4.5.2 Delivery Idler Gear
Area of application: [1]
Grease: MOLYKOTE EM-50L
Amount: 40 +/-10 mg
Location of application:
- 2 locations on gear support shaft in opposition
- spread in axial direction
[10]
[9]
[13]
[8]
[7]
[12]
[11]
T-4-3
[9] Drive releasing arm
[10] FU delivery roller
[11] Pickup idler gear
[12] Feed deceleration gear
[13] Fixing deceleration gear
[14] FD delivery roller
[15] Large gear bushing F
[16] Pressure roller
[14]
[16]
Chapter 4
0002-4235
0002-4236
4-7