Removing The Top Cover; Removing The Right Cover; Removing The Left Cover; Removing The Power Supply Shield Plate - Canon LBP3200 - LBP 3200 B/W Laser Printer Service Manual

[1]
[2]
[3]
F-3-83
3.4.3.4 Removing the Top
Cover
1) Open the front cover. (This step may be skipped if
the front cover has already been removed.)
2) Free the 2 claws [1], and detach the top cover [2].
[1]
[2]
F-3-84
3.4.3.5 Removing the Right
Cover
1) Remove the screw [1].
2) Free the claw [2] at the rear; then, free the claw [4]
at the front bottom as by sliding the bottom of the
right cover [3] to the front.
3) While opening the bottom of the right cover [3]
slightly toward the outside, slide upward to detach
the right cover.
[4]
0002-3522
0002-3531
[1]
[4]
F-3-85
3.4.3.6 Removing the Left
Cover
1) Remove the screw [1].
2) Free the claw [2] at the rear; then, free the claw [4]
at the front bottom as by sliding the bottom of the
left cover [3] to the front.
3) While opening the bottom of the left cover [3]
slightly toward the outside, slide upward to detach
the left cover.
[3]
[2]
[4]
F-3-86
3.4.3.7 Removing the Power
Supply Shield Plate
1) Remove the 5 screws [1], and detach the power
supply shield plate [2].
Chapter 3
[3]
[2]
0002-3528
[1]
0002-3752
3-23