Download  Print this page

Removing The Power Supply Assembly - Canon LBP3200 - LBP 3200 B/W Laser Printer Service Manual

Desk-top page printer.
Hide thumbs

Advertisement

[1]
[4]
F-3-34
3.1.8.6
Removing the Left
Cover
1) Remove the screw [1].
2) Free the claw [2] at the rear; then, free the claw [4]
at the front bottom as by sliding the bottom of the
left cover [3] to the front.
3) While opening the bottom of the left cover [3]
slightly toward the outside, slide upward to detach
the left cover.
[3]
[2]
[4]
F-3-35
3.1.8.7 Removing the Power
Supply Shield Plate
1) Remove the 5 screws [1], and detach the power
supply shield plate [2].
[3]
[2]
0002-3745
[1]
0002-3750
[1]
[2]
F-3-36
3.1.8.8 Removing the Power
Supply Assembly
1) Remove the 3 screws [1].
2) Disconnect the 4 connectors [2], and free the flat
cable [3] of the engine controller board.
[2]
[1]
[1]
F-3-37
3) Push down the front of the power supply assembly
[2] while feeding the left/right boss [2]; then, slide
it out to detach.
[1]
[2]
F-3-38
Chapter 3
[1]
0002-3751
[3]
3-9

Advertisement

Table of Contents

   Also See for Canon LBP3200 - LBP 3200 B/W Laser Printer

   Related Manuals for Canon LBP3200 - LBP 3200 B/W Laser Printer

This manual is also suitable for:

Lbp3200 series

Comments to this Manuals

Symbols: 0
Latest comments: