Configuring The Switch With The Cli-Based Setup Program - Cisco 3750G-12S - Catalyst Switch - Stackable Hardware Installation Manual

Configuring the Switch with the CLI-Based
Setup Program
This appendix provides a CLI-based setup procedure for a standalone switch or a switch stack. Before
connecting the switch to a power source, review the safety warnings in
For detailed installation procedures on rack-mounting your switch, stacking your switches, or
Note
connecting to small form-factor pluggable (SFP) or XENPAK modules, see
Installation."
These steps describe how to do a simple installation:
Accessing the CLI, page D-2
1.
Taking Out What You Need, page D-3
2.
3. Stacking the Switches (Optional), page D-4
4. Connecting to the Console Port, page D-5
5. Starting the Terminal Emulation Software, page D-6
Connecting to a Power Source, page D-6
6.
Entering the Initial Configuration Information, page D-7
7.
OL-6336-09
For product overview information, see
A P P E N D I X
Chapter 2, "Switch Installation."
Chapter 2, "Switch
Chapter 1, "Product Overview."
Catalyst 3750 Switch Hardware Installation Guide
D
D-1