Catalyst 3750-24Ts And 3750V2-24Ts Switch Front Panel - Cisco 3750G-12S - Catalyst Switch - Stackable Hardware Installation Manual

Front Panel Description
The downlink SFP module slots on the Catalyst 3750V2-24FS switch are numbered 1 through 24.
The slots are grouped in pairs. The first member of the pair (slots 1) is above the second member
(slots 2), as shown in
Note The Catalyst 3750V2-24FS switch supports the 100BASE-FX multimode fiber (MMF) SFPs only in the
downlink SFP module slots.
The uplink SFP modules slots are numbered 1 (left) and 2 (right).
Figure 1-2
1

Catalyst 3750-24TS and 3750V2-24TS Switch Front Panel

The 10/100 ports on the switch are numbered 1 through 24. The ports are grouped in pairs. The first
member of the pair (port 1) is above the second member (port 2), as shown in
port 4, and so on. The SFP module slots are numbered 1 (left) and 2 (right).
Figure 1-3
SYS T
RPS
MA STR
STA T
DUP LX
SPE ED
STA CK
MO DE
1
Catalyst 3750 Switch Hardware Installation Guide
1-4
Figure 1-2.
Catalyst 3750V2-24FS Switch
1
SFP module slots (downlink)
Catalyst 3750-24TS and 3750V2-24TS Switch
1 2
3 4
5 6
1X
7 8
9 10
2X
2
10/100 ports SFP module slots
2
2
SFP module slots (uplink)
11 12
11X
13 14
15 16
13X 17 18
19 20
21 22 Ca tal yst
23 24 37 50
SER IES
23X
12X
14X
1
24X 2
1
2
Chapter 1 Product Overview
Figure 1-3. Port 3 is above
OL-6336-10