Recommended Cabling Configurations - Cisco 3750G-12S - Catalyst Switch - Stackable Hardware Installation Manual

Planning the Stack
Figure 2-3
A
Figure 2-4
A

Recommended Cabling Configurations

This section describes the recommended cabling configurations for stacking the switches.
Stacking Switches in Vertical Racks or on a Table
Figure 2-5
In this example, the switches are stacked in a vertical rack or on a table. This configuration provides
redundant connections.
Figure 2-5
The configuration examples in
0.5-meter StackWise cable. This configuration also provides redundant connections.
Catalyst 3750 Switch Hardware Installation Guide
2-10
Example of a Stack with a Failover Condition
B
C
Example of a Partitioned Stack with a Failover Condition
B
is an example of a recommended configuration using the supplied 0.5-meter StackWise cable.
Stacking the Switches in a Vertical Rack or on a Table Using the 0.5-meter
StackWise Cable
Figure 2-6 use the 3-meter StackWise cable in addition to the supplied
Chapter 2 Switch Installation
OL-6336-10