Cisco 3750G-12S - Catalyst Switch - Stackable Hardware Installation Manual page 125

Appendix C Connecting to DC Power
Figure C-8
Repeat Steps 4 and 5 for the remaining three DC-input power source wires.
Step 7
completed wiring of a terminal block plug.
Figure C-9
Step 8 Insert the terminal block plug in the terminal block header on the switch rear panel, as shown
in Figure
Secure the wires coming in from the terminal block so that they cannot be disturbed by casual contact.
Caution
For example, use tie wraps to secure the wires to the rack.
OL-6336-10
Torquing the Terminal-Block Captive Screws
Completed Wiring of Terminal Block Plug
C-10.
Torque to 4.5 lbf-in. (72 ozf-in.)
Return
Feed A
Negative
Return
Feed B
Negative
Catalyst 3750 Switch Hardware Installation Guide
Connecting to DC Power
Figure C-9 shows the
C-7