Asus GigaX2024X - GigaX 2024X Switch User Manual page 85

CLI command : l2 rate set <enable/disable> [<mode (1:broadcast only,
2:broadcast and multicast, 3:broadcast, multicast and unknown unicast )>
<limit rate (70~250000 Kbps/sec)>]
[Reload]
Restores the previous saved settings from configuration file.
CLI command : l2 rate retrieve
[Aging Time]
User can set the ARL (Address Resolution Logic) entries aging time by setting
the aging time value.
CLI command : l2 arl age [aging time value]
[Query by Port]
ARL entries existed in ARL table can be queried according to port number.
CLI command : l2 arl port <port number>
[Query by VLAN ID]
ARL entries existed in ARL table can be queried according to VLAN ID.
CLI command : l2 arl vlan <vlan id>
[Query by MAC Address]
ARL entries existed in ARL table can be queried according to MAC address.
CLI command : l2 arl mac <mac address> [vlan id]
GigaX Series L2 Managed Switch User Guide
85