3M™ Super Close Projection System
Elevator Buttons
© 3M 2008. All Rights Reserved.
Adjusting the Projected Image
Adjusting the Projector Image Height
The projector is equipped with elevator feet for adjusting
the image height.
To raise the image:
1. Press the elevator buttons
2. Raise the image to the desired height angle
lease the button to lock the elevator feet into position.
3. Rotate the tilt adjusting foot
angle.
To lower the image:
1. Press the elevator buttons.
2. Lower the image, then release the button to lock the
elevator feet into position.
3. Rotate the tilt adjusting foot
angle.
1
2
Elevator Feet
.
to fine-tune the display
to fine-tune the display
3
Tilt Adjusting Foot
Installation
, then re-
1
2
Elevator Feet
17