Installation
14
Adjusting the Projected Image
Adjusting the Projector Image Height
The projector is equipped with elevator feet for adjusting
the image height.
To raise the image:
1. Press the elevator buttons
2. Raise the image to the desired height angle
lease the button to lock the elevator feet into position.
3. Use screw in feet
To lower the image:
1. Press the elevator buttons.
2. Lower the image, then release the button to lock the
elevator feet into position.
3. Use screw in foot
Elevator Buttons
1
2
Elevator Feet
3M™ Digital Projector
.
3
Tilt Adjusting Foot
© 3M 2008. All Rights Reserved.
, then re-
1
2
Elevator Feet