3M SCP715 Operator's Manual page 49

Appendices
44
5. Select the "Change" button under the "Monitor" tab.
6. Click on "Show all devices." Next, select "Standard monitor
types" under the SP box; choose the resolution mode you need
under the "Models" box.
If you are using a Notebook:

1. First, follow the steps above to adjust resolution of the
computer.
2. Press the toggle output settings. example: [Fn]+[F3]
HP & Compaq [Fn]+[F4]
Dell
Gateway
Mac Apple:
System PreferenceDisplayArrangementMirror display
If you experience difficulty changing resolutions or your monitor

freezes, restart all equipment including the projector.
Problem: The screen of the Notebook or PowerBook computer
is not displaying a presentation
If you are using a Notebook PC:

Some Notebook PCs may deactivate their own screens when a
second display device is in use. Each has a different way to be
reactivated. Refer to your computer's documentation for detailed
information.
Problem: Image is unstable or flickering
Use "Phase" to correct it. (see page 36)

Change the monitor colour setting on your computer.

Problem: Image has vertical flickering bar
Use "Frequency" to make an adjustment. (see page 36)

Check and reconfigure the display mode of your graphic card to

make it compatible with the product.
3M™ Super Close Projection System
IBM
 [Fn]+[F8] NEC
 [Fn]+[F4] Toshiba 
© 3M 2008. All Rights Reserved.
[Fn]+[F7]

[Fn]+[F3]

[Fn]+[F5]