On-Screen Display Menus; How To Operate - 3M SCP715 Operator's Manual

3M™ Super Close Projection System
Main Menu
© 3M 2008. All Rights Reserved.
On Screen Display Menus
The Projector has multilingual On Screen Display menus
that allow you to make image adjustments and change a
variety of settings. The projector will automatically detect
the source.

How to Operate

1.
To open the OSD menu, press "Menu" on the Remote Control or
Control Panel.
2.
When OSD is displayed, use
main menu. While making a selection on a particular page, press
key to enter sub menu.
3.
Use keys to select the desired item and adjust the settings
by key.
4.
Select the next item to be adjusted in the sub menu and adjust as
described above.
5.
Press "Menu" to confirm, and the screen will return to the main
menu.
6.
To exit, press "Menu" again. The OSD menu will close and the
projector will automatically save the new settings.
keys to select any item in the
Sub Menu Setting
User Controls
23