3M™ Super Close Projection System
© 3M 2008. All Rights Reserved.
For example:
Use Microsoft Internet Explorer (IE) web browser to control the projec-
tor, the IP address is http://10.0.50.100.
Step 1: Find an IP Address (10.0.50.100) from LAN function of
projector.
Step 2: Select apply and press "Enter" button to submit function or
press "menu" key to exit.
Step 3: To open Network Connections, click Start, click Control
Panel, click Network and Internet Connections, and then
click Network Connections. Click the connection you want
to configure, and then, under Network Tasks
Change settings of this
connection.
Step 4: On the General tab, under
This connection uses the
following items, click Inter-
net Protocol (TCP/IP), and
then click "Properties."
Step 5: Click Use the following IP
address, and type in as
below:
1) IP address: 10.0.50.XXX
2) Subnet mask: 255.255.0.0
3) Default gateway:
10.0.50.254
Step 6: To open Internet Options,
click IE web browser, click
Internet Options, click the
Connections tab and click
"LAN Settings..."
User Controls
, click
39