Configuring Network Security Settings; Bluetooth - HP iPAQ rx4200 - Mobile Media Companion Product Information Manual

Configuring Network Security Settings

A wireless network can be added when the network is automatically detected.
Or, manually enter the settings information to add the network. To determine
if authentication information is needed, check with your Network Administrator
or Hotspot Service Provider.
1. Tap Start > Today > iPAQ Wireless.
2. Turn on WLAN by tapping the WLAN icon.
3. Tap View WLAN Networks to choose an available network.
4. In Configure Wireless Networks, select the network to configure.
5. To use authentication, tap the Network Key tab and select the
authentication method from the Authentication list.
6. To use data encryption, select an encryption method from the Data
Encryption list.
7. To automatically use a network key, tap The key is automatically
provided. Otherwise, enter the network key manually.

Bluetooth

Your HP iPAQ comes with built-in Bluetooth which is a short-range wireless
communications technology. Devices with Bluetooth capabilities can
exchange information over a distance of about 30 feet (10 meters) without
requiring a physical connection.
Use Bluetooth to:
●
Transfer information, such as files, appointments, tasks, and contact
cards, between devices that have Bluetooth capabilities.
●
Print data to a Bluetooth-designated printer.
●
Use a Bluetooth service. Once you connect to another device or
computer using Bluetooth, you can locate and use any of the services
available on that device.
44 HP iPAQ Product Information Guide ENWW