●
Use virtual private networks (VPNs) for secure remote access
●
Use hotspots for wireless connectivity
Turning WLAN On or Off
To turn WLAN on or off:
1.
Tap Start > Today > iPAQ Wireless.
2.
Tap the WLAN icon on the iPAQ Wireless screen.
When WLAN is on:
●
The WLAN icon on the iPAQ Wireless screen turns amber or green.
●
The wireless light-emitting diode (LED) on your HP iPAQ flashes blue.
NOTE Even though the indicator is blue to indicate WLAN is turned
on, it does not necessarily mean a connection has been established
with another device or access point.
Turn WLAN off when you are not using it by tapping the WLAN icon again.
When WLAN is off, the WLAN icon turns gray, and the blue LED turns off.
Searching for WLAN Networks to Access
Networks that have been already configured are preferred networks. Choose
whether to connect only to preferred networks or to have your HP iPAQ search
for and connect to any available network (preferred or not).
1.
Tap Start > Today > iPAQ Wireless.
2.
Tap the WLAN icon to turn on WLAN.
3.
Tap View WLAN Networks.
4.
In the Networks to access box, tap the type of network to connect to
(All Available, Only access points, or Only computer-to-computer).
5.
Tap the wireless network to which you want to connect.
ENWW
WLAN
43