Setting Up An E-Mail Account On An Exchange Server - HP iPAQ rx4200 - Mobile Media Companion Product Information Manual

NOTE Some of the messaging applications may vary and are
available only on select HP iPAQ models.

Setting up an E-mail Account on an Exchange Server

Synchronize directly with an Exchange Server using a connection to a
wireless network or a personal computer.
To set up e-mail on an Exchange server:
1. Tap Start > Programs > ActiveSync.
NOTE If a screen displays several messages, click on the link
that reads If your company supports synchronizing directly
with its Exchange Server you can set up your HP iPAQ to
synchronize with it, then follow the series of steps to
synchronize your e-mail account with the Exchange Server.
Otherwise, continue with the steps below.
2. Tap Menu > Configure Server.
If you have not set up a synchronization server link, the following
message is displayed: Add Server Source.
3. In the Server address box, enter the name of the server running
Exchange 2003.
4. Select the This server requires an encrypted (SSL) connection check
box if required by your IT department.
Most companies require this option, and if this box is not checked, you
cannot sync with your company Exchange Server.
5. Tap Next.
6. Enter your name, password, and domain, and then tap Next.
7. Select the Save password text box if you want to enable automatic sync.
8. To change the rules for resolving synchronization conflicts, tap
Advanced.
ENWW Mobile Office 37